TOP > Products > Conversion Adapter for JTAG
Conversion Adapter for JTAG
SICA(Small Interface Cable Adapter)
Device of supported arm | |
ARM7TDMI/ARM7TDMI-S, ARM710T, ARM720T, ARM740T, ARM7EJ-S, ARM920T/922T, ARM940T, ARM926EJ-S, ARM946E-S, ARM966E-S, ARM968E-S, ARM996HS, ARM1020E/1022E, ARM1026EJ-S, ARM1136J(F)-S, ARM1156T2(F)-S, ARM1176JZ(F)-S, ARM11 MPCore, Cortex-A9/Cortex-A9 MPCore, Cortex-A8, Cortex-R4(F), Cortex-M0, Cortex-M1, Cortex-M3, SC100/110/200/210/300, StrongARM, XScale, 0MAP1, 0MAP2, 0MAP3, 0MAP4, i.MX2x, i.MX3x, i.MX5x |
This connector converts for normality pitch (2.54mm pitch) into a small connector (0.5mm pitch) which connector is being used by the emulator, the programmer of on-board,and serial I/F of JTAG.10pin,14pin,16pin ,20pin and 38pin are available with standard.Moreover, there is 30pin types that contact life times is 50 times.
▼ Features
- Reducing connector space to one sixth compared to plug / pin connectors of 2.54mm center pitch.
- The target board connector surface mounted on PCB without needing any "through holes". Now,the other side of PCB is available for mounting components.
- This cable is very flexible. Therefore, the target board connector can be placed close to CPU.
- Connector contact life is 500 times of insertion and extraction.
- A polarity key prevents the user to plug the connectors in the wrong direction.
- This cable is lead free product which is very safe for environment.
◎Connector Type |
|||||||||||||||||||||||||||||||||||
Option part up on request SICA2P20S05 : 5 piece are packed in a plastic bag. *The information in this document is subject to change without notice. |
|
◎Connector Type |
||||||||||||||||||||
Option part up on request SICA2P40S05 : 5 piece are packed in a plastic bag. *The information in this document is subject to change without notice. |
|
*For more information about this product can be confirmed at the following link.
[ SICA Series ]