TEC-KC Cable Specifications

TEC-KC Cable Specifications

Use environment for TEC-KC Cable

No. Item When in operation When not in operation

1 Temperature
(degrees C) 10 to 35 -10 to 50

2 Humidity 35 to 80% RH
(no condensation) 30 to 80% RH
(no condensation)

3 Surrounding gas No corrosive gas No corrosive gas

4 Static electricity not be static electricity not be static electricity

Material of cable

Item Specification

Target side Material FR-4(Flash gold-plated finish)

Composition YQ(TQ)SOCKET-Surface mounting conversion board

Externals Reference for figure

cable Material Polymide

Composition Micro strip signal lines(Signal lines on both layers are running on the ground line oppoitel layers), *Shield type

Externals 200mm x 23.5mm/80signals
200mm x 16mm/50signals

Emulator side Material FR-4(Flash gold-plated finish)

Composition RTQ(YQ)PLUG-Surface mounting conversion board

Externals Reference for figure

Specification for shield material

Shield Adhensive Thickness Shield type

Silver deposition film Heat stiffening type 154 micrometer 60dB(KEC)

No.	Item	When in operation	When not in operation
1	Temperature (degrees C)	10 to 35	-10 to 50
2	Humidity	35 to 80% RH (no condensation)	30 to 80% RH (no condensation)
3	Surrounding gas	No corrosive gas	No corrosive gas
4	Static electricity	not be static electricity	not be static electricity

Item		Specification
Target side	Material	FR-4(Flash gold-plated finish)
	Composition	YQ(TQ)SOCKET-Surface mounting conversion board
	Externals	Reference for figure
cable	Material	Polymide
	Composition	Micro strip signal lines(Signal lines on both layers are running on the ground line oppoitel layers), *Shield type
	Externals	200mm x 23.5mm/80signals 200mm x 16mm/50signals
Emulator side	Material	FR-4(Flash gold-plated finish)
	Composition	RTQ(YQ)PLUG-Surface mounting conversion board
	Externals	Reference for figure

Shield	Adhensive	Thickness	Shield type
Silver deposition film	Heat stiffening type	154 micrometer	60dB(KEC)